Resetting the NTS-6001 Web Config Password
Posted by Stuart Thomason, Last modified by Stuart Thomason on 13 February 2014 15:21

First, you need to connect up a monitor and keyboard to the unit. With these connected you should see the same display on the monitor as on the LCD display.

Next press "Alt + F2"

The Default username is "root" and the Default passowrd is "galleon"

Press "q" followed by enter to break out of the menu system.

Then enter these commands each line at a time, pressing enter after each line:

mount -t vfat -o rw /dev/sda1 /mnt
cd /mnt
rm config.tar
cd /tmp
umount /mnt

*If the first command fails and says that the device is not connected, try replacing "sda1" with "hda1"

Once this is done and the unit has rebooted, try to connect to the unit using a web browser. The Default username is "admin" and the Default password is "password"

(0 vote(s))
Not helpful

Comments (0)
Post a new comment
Full Name:
CAPTCHA Verification 
Please complete the below captcha challenge (we use this to prevent automated submissions).