How to upgrade to Firmware 12#9
Posted by Syed Naqvi, Last modified by Syed Naqvi on 04 August 2022 13:01

This article contains upgrade instructions for the NTS-6002.

Please note: Upon update, the default network settings are restored to DHCP,  as such the NTS-6002 may not be accessible via the web interface if your network does not have a DHCP server attached to it.

(A) Upgrading via the web interface

1. Log in to the Web Interface and navigate to Administration. Select Backup.

2. Click Create Backup and download the backup file to your computer.

3. Download the firmware file from here(please right-click on the link and click save as...)

4. From the Web Interface, select Administration from the navigation menu on the left.

5. Select Firmware Update and select the upgrade file.

6. Click the Update button.

The device will now perform the upgrade. Please allow 1 minute for the device to upgrade.

To verify the upgrade was successful, click Software Versions under the Administration tab. Under Operating System, confirm 5.10.129-Galleon-NTS-6002.V12 - #9 is displayed.

For Release Notes, click here.

(0 vote(s))
Not helpful

Comments (0)
Post a new comment
Full Name:
CAPTCHA Verification 
Please complete the below captcha challenge (we use this to prevent automated submissions).