Wiring Instructions - GPS Antenna - Cat5e/Cat6 Cable
Posted by Uzair A., Last modified by Uzair A. on 16 July 2021 11:26

Extending the GPS antenna with Cat5e/Cat6 Cable

If you purchased your antenna on or after 11/02/2021 and your antenna looks like the photo above, please follow the instructions below.

  1. Cut the 15-way D-type connector off the antenna cable, ensuring you have plenty of slack cable for the next steps.
  2. Using the wiring schematic below, wire the antenna cable into the terminal block.
  3. Using the wiring schematic below, wire your CAT5e/CAT6 extension cable to the other side of the terminal block.
  4. Using the wiring schematic below, wire the 15-way D-type connector onto the end of the CAT5e/CAT6 extension cable.

Note: The supplied junction box is not weatherproof.


Extending the Old GPS antenna with Cat5e/Cat6 Cable

If you purchased your antenna before 11/02/2021 and your antenna looks like the photo above, please follow the wiring schematic below:

GPS Cat5 Wiring

GPS Cat5 Wiring

GPS Cat5 Wiring

(0 vote(s))
Helpful
Not helpful